|
HS (R)Series Introduction:
HS(R) pump is horizontal centrifugal heavy duty slurry pump and it is designed for the continuous pumping of high abrasive, high density slurries with minimal maintenance requirements. It will maintain high efficiency over the wear life of its components. The rubber and metal lined pumps feature casings which are radially split into two halves. Minimum casing bolts reduce maintenance and minimise downtime. The pumps of HS can be installed as multi-stage series.
Features:
1.Replaceable wear-resistant metal or rubber liners and impellers, long service life time.
2. Easy to adjust the space between impeller and front liner and can be removed completely when maintaining.
3.Bearing assembly use grease lubrication.
4. Seal types: packing seal, expeller seal and mechanical seal.
5. Discharge direction can be installed at intervals of 45 degrees as request and oriented to any eight positions to suit applications.
6. Drive types: V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices.
7. Wide application, good NPSH and high efficiency. The series pump can be installed in multistage to meet the delivery for long distance.
Specification :
D:25 mm to 450 mm
Q: to 5,000 m3/hr
H: to 73 m
Performance Sheet:
Pump
Model Allowable
Max. Power(KW) Clear Water Performance
Capacity Q Head
H(m) Speed
n(r/min) Max.Eff.
η% NPSH
(m) Impeller
Dia.
m3/h l/s
25HS-B 15 12.6-28.8 3.5-8 6-68 1200-3800 40 2-4 152
25HSR-B 15 10.8-25.2 3-7 7-52 1400-3400 35
25HHS-C 30 16.2-34.2 4.5-9.5 25-92 1400-2200 20 2-5.5 330
40HS-B 15 32.4-72 9-20 6-58 1200-3200 45 3.5-8 184
40HSR-B 15 25.2-54 7-15 5.5-41 1000-2600 50 2.5-5 178
50HS-C 30 39.6-86.4 11-24 12-64 1300-2700 55 4-6 214
50HSR-C 30 36-75.6 10-21 13-39 1300-2100
2-4 213
50HHS-D 60 68.4-136.8 19-38 25-87 850-1400 47 3-7.5 457
75HS-C 30 86.4-198 24-55 9-52 1000-2200 71 4-6 245
75HS-D 60 86.4-198 24-55 9-52 1000-2200 71 4-6 245
75HSR-C 30 79.2-180 22-50 5-34.5 800-1800 59 3-5 245
75HSR-D 60 79.2-180 22-50 5-34.5 800-1800 59 3-5 245
100HS-D 60 162-360 45-100 12-56 800-1550 65 5-8 365
100HS-E 120 162-360 45-100 12-56 800-1550 65 5-8 365
100HSR-D 60 144-324 40-90 12-45 800-1350 65 3-5 365
100HSR-E 120 144-324 40-90 12-45 800-1350 65 3-5 365
100HHS-F 260 324-720 90-200 30-118 600-1000 64 3-8 711
150HS-E 120 360-828 100-230 10-61 500-1140 72 2-9 510
150HS-S 300 360-828 100-230 10-61 500-1140 72 2-9 510
150HSR-E 120 324-720 90-200 7-49 400-1000 65 5-10 510
150HSR-R 300 324-720 90-200 7-49 400-1000 65 5-10 510
150HHS-S 560 468-1008 130-280 20-94 500-1000 65 4-12 711
200HS-ST 560 612-1368 170-380 11-61 400-850 71 4-10 686
200HSR-ST 560 540-1188 200-450 7-45 300-650 80 2.5-7.5 686
200MS-E 120 540-1440 150-400 14-60 600-1000 73 4-10 549
200MS-R 300 540-1440 150-400 14-60 600-1000 73 4-10 549
250HS-ST 560 936-1980 260-550 7-68 300-800 82 6 762
250HSR-ST 560 720-1620 320-700 13-14 300-500 79 3-8 762
300HS-ST 560 1260-2772 350-770 13-63 300-600 77 3-10 965
300HSR-ST 560 1152-2520 380-850 11-63 250-550 79 4-10 965
350HS-ST 1200 1368-3060 380-850 11-63 250-550 79 4-10 1067
400HS-TU 1200 2160-5054 600-1400 8-66 200-500 80 4.5-9 1245
450HS-TU 1200 2520-5400 700-1500 13-57 200-400 85 5-10 1370
Remark:
1.Capacity range recommended:50%Q'≤Q≤110%Q'(Q' Appropriate to capacity at highest efficiency point).
2.NPSH: appropriate to point Q recommended at highest speed.
Application:
HS(R) series slurry pump is widely used in metallurgy, mining, mineral processing, dredging, de-watering, water treatment, coal washing, mill, cyclone feed, tailing, power, building material...etc. various industrial sites. HS pumps are called different names for different working duties: Mineral processing pump, Mill discharge slurry Pump, Booster pump, Feeding pump, Tailing pump,Transfer pump Thickner Underflow Pump, De-watering screen pump, Pressure pump, Concentrate pump... ...
|
|
offer 
new 
[8] 9 10 11 12 13 14 15 16 17 18 19 20 21 22 
